2/3 MOTORIZED VALVE FOR FCU
“RC” make motorized valve has been specifically designed for F.C.U. to provide tight shut off, to stop the flow from the coil, available in sizes from 15mm to 25mm and 5/8: Flare connections with manual override provision.
Application
These valves are compact units consisting of small electric actuator and 2/3 way valve for controlling the flow of water or any liquid that is not injurious to brass. These valves are designed for use in fan coil units or any other system requiring quite and compact water lines.
These valve are made for use upto 150 P.S.I.G.
Note: This is a simple diverting valve and can be used at any location where liquid needs to be diverted, this valve is for use in liquid only.
Valve/motor Rating
- VALVE :-
- CONSTRUCTION MATERIEL: BRASS
- PIPE THREAD-5/8" FLARE (M)
- MOTOR :-
- SYNCHRON (U.S.A.)
- MOTOR SPEED: 6 R.P.M.
- ELECT. RATING: 220V AC 60 HZ 5 W
Installation
Valve installation should only be performed by a trained experienced technician. The ratings given on the valve should be checked and confirmed to be suitable for line use prior to installation. Install the valve in an area with sufficient clearance, so that the manual opening lever on the body can be moved freely.
It can be installed at any position on the vertical pipeline. If it is mounted horizontally. The power head should be along or above the center line of the piping. Always ensure that sufficient space is provided above the power head to remove the cover for servicing.
