Water Flow Switch
MODEL :- RC-1KD4
“RC” make Flow Switch is designed for use on Non- Viscous liquid, Water, Methyl Glycol Solutions or any other liquid not injurious to Brass & Non-Ferrous Metal parts that come in the contact with the liquid. The SPDT contacts make or break and electrical circuit when flow starts or stops.
They can be wired to close circuit and open a second circuit. When liquid flow either exceeds or drops below the adjusting flow rate.
“RC” flow switch is designed for use with non-viscous liquids such as water, methyl glycol solutions, or any other fluids that are non-corrosive to brass and non-ferrous metal components in contact with the liquid.
Equipped with spdt contacts, the switch activates or deactivates an electrical circuit when the flow starts or stops. It can be configured to close one circuit and open another when the flow rate either exceeds or falls below the pre-set adjustable threshold making it ideal for reliable flow monitoring and control in a variety of systems.
Can Be Used In:
- Water purification and treatment systems
- Booster pumps
- Fast shut down on high input boilers to guard against circulation failure
- Cooling systems for electronic tube, bearing & compressor
- Can be used any where, who wants to take Flow, No-Flow signal.
| Description | Details |
|---|---|
| Pipe Connection | 20mm BSMPT |
| Type | In-Line type |
| Max. Liquid Pressure | 150 PSIG |
| Max. Liquid Temperature | 110°C |
| Min. Liquid Temperature | 5°C |
| ELECTRICAL RATING | |||
|---|---|---|---|
| MOTOR RATING | 120 V | 208 V | 240 V |
| HORSEPOWER | 1 | 1 | 1 |
| A.C. FULL LOAD Amps. | 16 | 8.8 | 8 |
| A.C. LOCKED ROTOR Amps. | 96 | 52.8 | 48 |
| NON-CONDUCTIVE LOAD Amps | 16 | 16 | 16 |
| CLASSIFICATION | FLOW CONTROL RANGE MINIMUM | FLOW CONTROL RANGE MAXIMUM | ||
|---|---|---|---|---|
| On-Flow | Off-Flow | On-Flow | Off-Flow | |
| CONNECTION SIZE 25mm | 0.6 | 0.3 | 1.1 | 0.9 |
(All of the above values are in G.P.M.)
(The above data is experimental data, it may have a tolerance of 10%)
| S.No. | Description | Details |
|---|---|---|
| 1 | MODEL | RC1KD4 |
| 2 | MEDIA | Water |
| 3 | BODY | Brass Gravity Die Cast IS:1264, Grade DCB-I |
| 4 | COVER | ABS |
| 5 | FLAPPER | S.S. |
| 6 | BASE PLATE | S.S.304 |
| 7 | SUPPORTING SPRING & SCREWS | S.S.304 |
| 8 | BELLOW | Copper Alloy |
| 9 | MICRO SWITCH | SPDT |
| 10 | MICRO SWITCH CONTACT | 1NO 1NC |
| 11 | MICRO SWITCH RATING | 220V AC, 15 Amp Max. |
| 12 | CONNECTION TYPE | In-Line Type |
| 13 | CONNECTION SIZE | 20mm (F) BSP |
| 14 | MAX. WORKING PRESSURE | 150 P.S.I.G. |
| 15 | CABLE GLAND | Rubber Gland |
| 16 | OPERATING TEMP. RANGE | 1°C to 95°C |
| 17 | DEGREE OF PROTECTION | IP 64 |
Water Flow Switch (Fire Fighting)
MODEL :- RC-61FF2
Air Flow Switch
MODEL :- RC-F62AA
Water Flow Switch
MODEL :- RC-61 To 66