Automatic Water Level Controller
“RC” Level Controller System minimizes water wastage by preventing unnecessary overflow. Each unit operates independently to maintain optimal water levels in overhead tanks efficiently
The “RC” make Level Controller System helps to minimize water wastage caused due to unnecessary over flowing ,it works in such a way that each overhead water tank level control system maintains its own level independently. When the automatic water level control system comes at low level, the inlet of the RC Motorized Valves open up, filling the tank and when the water level reaches high level the RC Motorized Valve closes. When all of the overhead tank Motorized Valve closes the pressure on the pump header increases and the pressure switch installed on the pump header cuts the pump, now if the water level in any of the over head tank decreases the Motorized valve will open releasing the pressure and when the pressure is released the pressure switch installed on the pump header will starts pumping water to fill the tanks.
| S.No | DESCRIPTION | RCLC1 | RCLC-2 | RCLC-3 |
|---|---|---|---|---|
| 1 | MAKE | RC | ||
| 2 | MODEL | RCLC1 | RCLC-2 | RCLC-3 |
| 3 | TYPE | Pre-wired panel, wall mountable | ||
| 4 | PANEL SIZE | 10” x 9” x 6” (L x W x H) | ||
| 5 | PANEL THICKNESS | 18 Gauges | ||
| 6 | CONTROLLER | Relay Based | ||
| 7 | M.C.B. | Schneider / L&T / ABB | ||
| 8 | INPUT POWER SUPPLY | 220V AC | ||
| 9 | OUTPUT CONTROL POWER SUPPLY | 220V AC & 24V DC | ||
| 10 | CONNECTORS | Melamine screw terminals | ||
| 11 | INTERNAL CONTROL WIRE | 1 mm² | ||
| 12 | CABLE ENTRY | PG11 cable gland | ||
| 13 | PANEL COATING | Baked enamel painted | ||
| 14 | LEVEL SWITCH | SS304, flange mountable, total length 1’10”, float area 9” | Plastic cable type floaty | No level switch |
| 15 | POWER RATING | 5 Amp | ||
Water Flow Switch (Fire Fighting)
MODEL :- RC-61FF2
Water Flow Switch
MODEL :- RC-1KD4
Air Flow Switch
MODEL :- RC-F62AA